This engineering drawing shows different types of geometry of butt welds. “Welds can be geometrically prepared in many different ways. The five basic types of weld joints are the butt joint, lap joint, corner joint, edge joint, and T …

Arc (MMA) Tutorial – Fillet Joints. Arc welded fillet joints are rarely intended to be full penetration joints. Joint preparation (as seen on the butt weld page) is not normally carried out, and the strength of the fillet weld is in the thickness of the weld itself rather than the depth of penetration.

4th Floor Nexor Bldg., 1677 Quezon Avenue, West Triangle, Quezon City, Philippines Tel. Nos.: (02) 9275441 / 3868056 / 4104288 * Telefax No.: (02) 4150143 www.nexorpipes.com * [email protected]

There are many types of butt welds, but all fall within one of these categories: single welded butt joints, double welded butt joint, and open or closed butt joints.

Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing fusion, which is distinct from lower temperature metal-joining techniques such as brazing and soldering, which do not melt the base metal.

Flash welding: Flash butt welding is one of the resistance welding processes employed to join metals. In flash butt welding process, the ends of the piece to be welded are connected to the secondary circuit of a transformer, while one piece is held firmly by a clamping device attached to a stationary platen; the other piece is clamped …

Type of Welds . Techniques used in making bead welds, butt joints, and fillet welds in the overhead position are discussed in the following paragraphs.

4-1. JOINT TYPES Welds are made at the junction of the various pieces that make up the weldment. The junctions of parts, or joints, are defined as the location where two or more nembers are to be joined.

Each welding joint has several variations to provide for different needs. Two different types of welds are used when welding these joints. The groove-type weld (butt weld) fills in grooves that are cut on the inside of two pieces of …

>Types of Joints < Besides different types of welds and welding beads, there are a variety of joint types used in welding. A joint refers to the way two metal plates come together, And the terms used to identify these intersections borrow from carpentry.